Multimatic 220 AC/DC

907757

Multi-process machine, Multimatic 220AC/DC allows you to weld any process including AC/DC TIG, MIG, flux-cored, and stick. A Portable and the easy-to-use machine make it a necessary tool for all light industrial application indoor or outdoor. You can power it with 120 or 240 Volts AC power. its fast and easy switching processes and setup make it a true welder-friendly machine.

Model Number	907757
Welding Process:	MIG, Flux-cored, Lift Arc AC/DC TIG, Pulsed TIG, DC Stick
Output Range:	With120VAC: MIG/FCAW 30–125A ,DC/AC TIG 20–140A, DC Stick 30–90A, With 240VAC: MIG/FCAW 30 – 230A ,DC/AC TIG 20 -210A, DC Stick 30 – 200 A
Input power:	120/240 V, 1-phase, 50/60 Hz
Rated Output:	120VAC: MIG/FCAW -105A at 19.2V, 60% Duty Cycle, DC TIG -130A at 15.2V, 40% Duty Cycle, DC Stick -90 A at 23.6 V, 40% Duty Cycle, 240VAC: MIG/FCAW – 200A at 24V,20% Duty Cycle & 170A at 21.5V, 40% Duty Cycle, DC TIG – 210A at 18.4V, 20% Duty Cycle, DC Stick – 200A at 28.4V, 15% Duty Cycle

All-in-One – Take on more projects with one machine that has MIG, Stick, AC, and DC TIG.
QuickTech™ – Automatically determines the polarity. MIG gun and TIG torch can stay connected at the same time. Automatically switches to the right process. Just hit the trigger or the foot control, and the machine automatically changes. Automatically recalls the settings from the last process used.
14-Pin Controlled Operator Alternatives – The standard 14-pin connector lets you choose your control for a customized experience, whether it’s a foot control, fingertip control, or wireless foot control.
Lightweight – The Multimatic® 220 AC/DC can go where the work is, plus the added convenience of one machine versus two or more, with its 56 lbs weight.
Dependable Arc Starts – Provides High-Frequency, non-contact arc starting to eliminate tungsten and material contamination time after time.
6010 Stick Electrode Capability – Superior Stick arc performance even on the difficult-to-run electrodes like E6010.
Auto-Set Technology -Offers predefined weld settings to increase ease of use and ensure that the job is done right for operators of all skill levels.
Generator Compatibility – Will be able to operate and provide full output when powered by an engine-driven welder with 10000 Watt (10K) output or higher, such as a Miller Bobcat or Trailblazer. Limited output will occur when used with smaller generators.
Multi-Voltage plug (MVP™) – Multi-voltage plug (MVP) allows connection to common 120 or 240 V power receptacles without the use of any tools— simply choose the plug that fits the receptacle and connect to the power cord.
Pro-Set Feature – This feature eliminates the guesswork when setting weld parameters. Use Pro-Set when you want the speed, convenience and confidence of pre-set controls. Simply select the feature and adjust until Pro-Set appears on the display. The Pro-Set feature is available for Balance, Frequency, Pulse, and DIG parameters.